News

Zinc Spraying Machine Flue Gas Recovery

In the process of zinc spraying, the zinc powder cannot be completely absorbed by the cast iron pipe, and the zinc dust is easily diffused into the workshop. If workers work in this environment for...

Zinc Spraying Machine Structure

The zinc spraying machine is mainly composed of a frame, a clamping and rotating mechanism, a lifting mechanism, a zinc spraying mechanism, an electro-hydraulic control system and a flue gas recove...

Zinc Spraying Machine Process

When the temperature of the cast pipe coming out of the annealing furnace is as low as 200℃, it can be sprayed on the finishing line zinc spraying machine. The zinc spraying temperature of cast iro...

Principle Of Zinc Spraying Machine

For cast iron pipes buried underground, working in general soil environment, the outer wall can only be coated with asphalt to meet the requirements of anti-corrosion. However, for highly corrosive...

The Difference Between Vacuum Coating Machine And Coating Machine

Vacuum coating machines generally refer to physical vapor deposition technology; coating machines include physical vapor deposition and chemical vapor deposition, as well as chemical plasma vapor d...

Vacuum Coating Machine Vacuum Coating Machine Manufacturer Vacuum Coating Equ...

The vacuum material should be cleaned before the vacuum process of the vacuum coating machine to remove pollutants from the surface of the workpiece or system material

Vacuum Coating Machine Equipment Plastic Products Vacuum Coating Machine

Electroplating process of vacuum coating machine for plastic products - Huicheng Vacuum There are two common electroplating processes for plastic products: water electroplating and vacuum ionization

Vacuum Coating Machine Equipment Vacuum Coating Machine Process Development

Vacuum Coating Machine, Vacuum Coating Machine Equipment Optical Processing Technology Development and Future Trend The technology is almost copied. The optical cold working adopts coarse grinding,...

Glass Coating Machine

The glass coating machine is equipped with a motor reducer as a power source on the upper part of the frame body, including guide rails, ball screws, sliding seats, rollers and nuts. One end of the...