What are the characteristics of zinc spraying machine

1. The paint film is cost-effective, the coating is smooth and delicate, and there are brush motor marks. It atomizes the pressure-charged spray of the paint into tiny particles, so that it spreads evenly on the surface of the wall, so that the wall paint forms a smooth, smooth and delicate coating on the wall, with brush motor marks and rolling marks. , rolling and other original methods are unparalleled.

2. High output power of spraying. The actual spraying output power of a single person can reach 200-500 square meters/hour, which is 10-15 times that of manual painting.

3. Good adhesion and long coating life. It uses high-pressure spray to make the atomized paint particles get strong mechanical energy; the paint particles use this mechanical energy to shoot into the porosity to make the paint film more delicate, and then improve the mechanical equipment bite force between the paint film and the wall, and then paint Layer adhesion, effectively extending the life of the coating.

4. The paint film is uniform in thickness and thickness, and the paint application rate is high. The thickness of the manual brush roller is extremely uneven, generally 30-250μm, and the coating application rate is low; while the airless spray can easily obtain a coating with a thickness of 30μm.

5. Easy to reach places and idle places. Because of the use of high-pressure airless spray, the paint sprayer has no gas, and the paint can easily reach places, gaps and uneven places that are difficult to brush, especially for the ceiling of office buildings with many central air-conditioning fire pipes, but roller brushes are difficult to construct. .

6. It can be sprayed with low-viscosity paint, while mobile phone pos and gas spraying can only use high-viscosity paint. Following the modification of social economy and everyone's consciousness, it has become a fashionable trend in China to replace mosaics and floor tiles with high-end interior wall paints to decorate walls. Water-based latex paint, because it has no harmful substances, is easy to clean, has rich colors, and does not cause environmental pollution to the natural environment, has basically become the most popular raw material for interior and exterior wall construction today. But wall paint is a water-soluble paint with high viscosity. During the construction of the project, the general manufacturers have very unsatisfactory constraints on the dilution of the original car paint with water. Generally, it is 10%-30%, which can release a lot of water without harming the function of the paint, especially the secret recipe paint. It is written on the product manual. . Connection dilution will lead to poor demulsification, and its layering, cleaning resistance, and performance will suffer different levels of damage. The damage level is positively related to the dilution, that is, the higher the dilution value, the worse the quality of the paint film. If it is not optimistic, according to the manufacturer's dilution request, the viscosity of the wall paint is very high, and the engineering construction is difficult. For example, it is difficult to be satisfied with the actual effect of the car paint if it is constructed by rolling paint, painting or gas spraying. The most popular method abroad is to use a high-pressure airless zinc sprayer for engineering construction.