How to improve the atomization problem of zinc spraying machine

The zinc spraying machine mainly sprays zinc evenly on the surface of the material to improve the corrosion resistance of the material. In the whole working process of the zinc spraying machine, the atomization problem will directly affect the final spraying effect. For the problem that the atomization of the zinc sprayer does not meet the standard, it can be effectively solved by increasing the arc area of the zinc sprayer.

What are the factors that affect the atomization of the zinc sprayer

The total flow of the cyclone

The total cyclone flow is an important factor affecting the predicted effect of atomization practice, and is closely related to the experimental results of the entire effect. Under normal circumstances, the larger the total gas flow rate, the faster the zinc particles can be propelled during the zinc spraying process, and the particles can be pushed more uniformly. If you want to better guarantee the reduction of gas, the cost of the entire product will undoubtedly increase accordingly.

2. Performance index of condensed wire

The main performance indicators of coagulation wire mainly include two points: viscosity and interfacial tension. Generally speaking, the viscosity and interfacial tension of the droplets are proportional to the thickness of the particles after atomization, that is, the stronger the viscosity, the greater the tension, and the thicker and stronger the atomized particles that appear later. If the viscosity is relatively small and the tension area is too small, the metal material polymer material formed by the later condensation has poor toughness and is easy to deform; the low viscosity of the zinc spraying machine improves the variability of the droplets in the segment and makes the droplets crack. .

How to improve the atomization problem in the arc area of zinc spraying machine

The higher the temperature of the arc area of the zinc spraying machine, the more conducive to enhancing the effect of cyclone heating effect. At the same time, the wire condensation is closely related to the atomization cyclone rate, the temperature of its arc area and the cyclone temperature of the atomization area. The arc zone characteristics of the zinc spraying machine can greatly improve the effect of atomization improvement.

With the continuous improvement and solution of the atomization problem of zinc spraying machines, the scope and fields of application of zinc spraying machines are also becoming wider and wider, especially for various appliance materials that need to be buried underground, which can be better improved. Its corrosion resistance and increased service life meet the needs of many producers and builders.