The use of zinc spraying machine requires knowledge reserve

The nozzle of the zinc sprayer should be sprayed towards the surface layer to avoid skewed spraying as much as possible. When the zinc sprayer sprays on both sides of the block, the paint mist should be quickly reduced. Since the two sides of the block often have to be sprayed twice or several times, the distance between the nozzle and the surface of the block should be moderate, and the zinc sprayer is quick-drying. Architectural paint spraying spacing can be changed. When the viscosity is thicker, the time interval is smaller, and when the viscosity is thinner, the time interval is larger. Although there are only a few millimeters of detail, beyond this range, the ideal paint layer cannot be obtained.

The zinc spraying machine equipment has indeed greatly improved the convenience of our current life, but if the equipment cannot be controlled in real time, the zinc spraying machine equipment cannot give full play to the practical effect. The zinc spraying machine uses air compression. A high-speed eruption beam is generated as a driving force.

The spraying material is sprayed to the surface of the steel to be treated at high speed. The zinc spraying machine is sprayed with zinc by the electrical control system, and the focus of zinc spraying, treatment time, treatment distance, blowback, and the movement and operation of the spray gun can be adjusted. The speed ratio of the table, etc., to find a suitable parameter to make the zinc spraying machine work on the cutting edge.

The function of the zinc spraying machine is very powerful. Improper use will not be conducive to our work and will also affect the product. Therefore, if we want to use the zinc spraying machine better, we must learn about the zinc spraying machine. real-time control.